Black plate (397,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
& SRVD OFF switch
SRVD OFF switch (left-hand drive models)
SRVD OFF switch (right-hand drive mod-
els)
SRVD OFF indicator
If the SRVD OFF switch is pressed, the
SRVD OFF indicator appears on the multi
information display of the comb ination
meter, and the SRVD is deactivated.
Press the switch again to activate the
SRVD. The SRVD OFF indicator disap-
pears.
NOTE
. In the following cases, press the
SRVD OFF switch to deactivate the
system. The system may not operate
properly due to blocked radar waves.
– When towing a trailer
– When a bicycle carrier or other
item is fitted to the rear of the
vehicle
– When using a chassis dynam-
ometer or free roller device, etc.
– When ru nning the en gine and
making t he whe els r otate wh ile
lifting up the vehicle
. If the ignition switch is turned to the
“LOCK”/“OFF” position, the last known
status of the system is maintained. For
example, if the ignition switch is turned
to the “LOCK”/“OFF” position with the
SRVD deactivated, the SRVD remains
deactivated the next time the ignition
switch is turned to the “ON” position.
. If the vehicle battery is disconnected
due to situations such as battery
terminal or fuse replacement, after the
battery is reconnected, the SRVD will
be activated.
Starting and operating/Subaru Rear Vehicle Detection (SRVD)
7-59
– CONTINUED –
7
To Next Page
Loading...
