Black plate (305,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
Voice command system op-
eration
& Voice command system
The voice command system enables the
audio, hands-free systems, etc. to be
operated using voice commands.
Refer to the “Command list” F5-65 for
samples of voice commands.
! Using the voice command system
! Steering switch
&
1
Talk switch
. Press the talk switch to start the voice
command system.
. To cancel voice recognition, press and
hold the talk switch.
! Microphone
. It is unnecessary to speak directly into
the microphone when giving a command.
NOTE
. Wait for the confirmation beep be-
fore speaking a command.
. Voice commands may not be recog-
nized if:
– Spoken too quickly.
– Spoken at a low or high volume.
– The roof or windows are open.
– Passengers are talking while
voice commands are spoken.
– The air conditioning speed is set
high.
– The air conditioning vents are
turned towards the microphone.
. In the following conditions, the sys-
tem may not recognize the command
properly and using voice commands
may not be possible:
– The command is incorrect or
unclear. Note that certain words,
accents or speech patterns may be
difficult for the system to recognize.
– There is excessive background
noise, such as wind noise.
Audio/Voice command system operation
5-63
– CONTINUED –
5
To Next Page
Loading...
