Black plate (145,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
Power rear gate button on the access key
Power rear gate button on the transmitter
To open the rear gate:
Press and hold the power rear gate button
when the rear gate is closed. The rear
gate will open automatically. Then the
hazard warning flashers will operate as
follows:
. When operating the power rear gate
button on the instrument panel: flashes
twice.
. When operating the power rear gate
button on the access key/transmitter:
flashes four times.
NOTE
While the rear gate is locked, you
cannot open the rear gate by operating
the power rear gate button on the
instrument panel. In such a case,
unlock the rear gate before operating
the power rear gate button.
To stop the rear gate midway:
Briefly press the power rear gate button
while the rear gate is being opened. Then
the hazard warning flashers w ill flash
twice.
If you press the power rear gate button
again, the rear gate will close.
You can open the rear gate by pressing
the power rear gate button briefly while the
rear gate is being closed.
To close the rear gate:
Press and hold the power rear gate
button. Then the hazard warning flashers
will flash twice. If you briefly press the
power rear gate button again, the rear
gate will open.
! By the buttons on the rear gate
Rear gate opener button
Power rear gate button on the inside edge
of the rear gate
Keys and doors/Rear gate (Outback)
2-35
– CONTINUED –
2
To Next Page
Loading...
