Subaru Outback 2016 - Page 176

Black plate (182,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
3-30 Instruments and controls/Warning and indicator lights
Inside warning
chime
Outside warning
chime
Access key
warning indica-
tor on meter
Operation indica-
tor on push-button
ignition switch
Status Action
Ding,
ding ...
(7 seconds)
—
(Flashes 1 sec.
intermittent)
—
Access key warning:
The vehicle was driven while the
access key is not inside the vehicle.
Carry the access key, and drive
the vehicle.
Ding —
(Flashes 1 sec.
intermittent)
—
Access key warning for engine
start:
The push-button ignition switch was
pressed while the access key is not
inside the vehicle.
Carry the access key, and press
the push-button ignition switch.
Ding
Beep, beep,
beep (3 times)
(Flashes 1 sec.
intermittent)
—
Access key takeout warning:
The driver exited the vehicle with the
access key and closed the driver’s
door while the push-button ignition
switch is in a position other than “OFF”
(in CVT models, when the select lever
is in the “P” position).
Switch the push-button ignition
switch to “OFF”, and get out of
the vehicle.
Ding
Beep, beep,
beep (3 times)
(Flashes 1 sec.
intermittent)
—
Passenger access key takeout
warning:
A fellow passenger exited the vehicle
with the access key and closed a door
other than the driver’s door while the
push-button ignition switch is in a
position other than “OFF”.
Return the access key to inside
the vehicle, or switch the push-
button ignition switch to “OFF”.
Long beep
(continuous)
Long beep
(continuous)
(Flashes 1 sec.
intermittent)
—
Access key takeout without P posi-
tion warning (CVT models):
The driver exited the vehicle with the
access key and closed the driver’s
door while the push-button ignition
switch is in a position other than “OFF”
and the select lever is in a position
other than the “P” position.
Shift the select lever to the “P”
position, switch the push-button
ignition switch to “OFF” and exit
the vehicle.