Black plate (302,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
5-60
Audio/What to do if...
When registering/connecting a cellular phone
Symptom Likely cause Solution
Page
Cellular
phone
This
system
A cellular phone cannot be regis-
tered.
An incorrect passcode was entered
on the cellular phone.
Enter the correct passcode on the cellular phone. * —
The registration operation has not
been completed on the cellular phone
side.
Complete the registration operation on the cellular
phone (approve registration on the phone).
* —
Old registration information remains
on either this system or the cellular
phone.
Delete the existing registration information from
both this system and the cellular phone, then
register the cellular phone you wish to connect to
this system.
*5-46
A Bluetooth connection cannot be
made.
Another Bluetooth device is already
connected.
Manually connect the cellular phone you wish to
use to this system.
— 5-46
Bluetooth function is not enabled on
the cellular phone.
Enable the Bluetooth function on the cellular phone. * —
Automatic Bluetooth connection on
this system is set to off.
Set automatic Bluetooth connection on this system
to on when the ignition switch is turned to the “ACC”
or “ON” position.
— 5-46
“Unable to dial. Please check your
phone. (Unable to dial. Please
check your phone.)”
Bluetooth function is not enabled on
the cellular phone.
Enable the Bluetooth function on the cellular phone. * —
Old registration information remains
on either this system or the cellular
phone.
Delete the existing registration information from
both this system and the cellular phone, then
register the cellular phone you wish to connect to
this system.
*
5-46
*: For details, refer to the owner’s manual that came with the cellular phone.
To Next Page
Loading...
