Black plate (523,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
Perform the following steps to replace the
bulbs.
Low beam headlight (models without LED
headlight)
1) Electrical connector
2) Clip
High beam headlight
1. Disconnect the electrical connector
from the bulb. When replacing the low
beam headlight bulb, remove the electrical
connector from the clip before disconnect-
ing the connector.
Low beam headlight (models without LED
headlight)
Maintenance and service/Replacing bulbs
11-51
– CONTINUED –
11
To Next Page
Loading...
