90 Netra T2000 Server Installation Guide • September 2006
▼ To Reset the Server
● If it is necessary to reset the server, use the uadmin command.
To simply reset the server, it is not necessary to power the server off and on.
▼ To Power Cycle the Server
If a simple reset does not clear a server problem, you can power the server off and
on with this procedure.
1. Shut down the Solaris OS.
DEBUG enabled
misc/forthdebug (159760 bytes) loaded
/platform/sun4v/kernel/drv/sparcv9/px symbol
intr_devino_to_sysino multiply defined
...
os-tba FPU not in use
configuring IPv4 interfaces: ipge0.
Hostname: wgs94-181
The system is coming up. Please wait.
NIS domain name is Ecd.East.Sun.COM
starting rpc services: rpcbind keyserv ypbind done.
Setting netmask of lo0 to 255.0.0.0
Setting netmask of bge0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4:
gateway wgs94-181
syslog service starting.
volume management starting.
Creating new rsa public/private host key pair
Creating new dsa public/private host key pair
The system is ready.
wgs94-181 console login:
# uadmin 2 1
To Next Page
