56 Netra T2000 Server Installation Guide • September 2006
2-Post Rackmounting Options
The server ships with a 19-inch, 4-post hardmount rack kit (see “Hardmounting the
Server in a 19-Inch 4-Post Rack” on page 22 for installation instructions).
TABLE 4-1
lists two additional 2-post rackmount kit options that can be ordered from Sun. This
chapter provides installation instructions for these rackmount kit options.
Note – If you have more than six DC-powered servers in the same rack, you might
exceed Telcordia NEBS EMI limits.
Hardmounting the Server in a 23-Inch 2-
Post Rack
▼ To Install a Server With a Hardmount in a 23-
Inch 2-Post Rack
The hardmount kit for a 23-inch 2-post rack consists of:
■ Two side brackets
■ Two rail guides
■ Two rear plates
■ Bag of screws
Note – The 23-inch 2-post rackmount kit supports rack web thicknesses (the width
of the rack post) of 76.20 mm (3 in.), 101.6 mm (4 in.), and 127 mm (5 in.).
TABLE 4-1 Optional Rackmount Kits
Mounting Kit Installation Instructions
23-inch 2-post rackmount kit “To Install a Server With a Hardmount in a 23-Inch
2-Post Rack” on page 56
19-inch 2-post rackmount kit “To Install a Server With a Hardmount in a 19-Inch
2-Post Rack” on page 61
To Next Page
Loading...
Need help?
General
