Sun Microsystems Netra T2000 Installation Guide

18 Netra T2000 Server Installation Guide • September 2006
■ Place components on an antistatic surface, such as a Sun antistatic discharge mat,
an antistatic bag, or a disposable antistatic mat.
■ Always wear an antistatic wrist strap connected to a metal surface on the chassis
when you work on server components.
Refer to the server service manual for the list of optional components.
Note – The optional component list might be updated at any time. Refer to the
SunStore™ web site (http://store.sun.com) for the most current list of server
supported components.
Slide Rail Assembly Notes
The rackmount kit has two slide rail assemblies. A slide rail assembly can be installed
on either the right or left side of the rack.
Each slide rail assembly consists of a three-section slide rail and a removable
mounting bracket (
FIGURE 2-3).
FIGURE 2-3 Sections of the Slide Rail Assembly
M
ount
i
ng
b
rac
k
et
Rear section
Front section
Middle section

Sun Microsystems Netra T2000 Specifications

General

Brand	Sun Microsystems
Model	Netra T2000
Category	Server
Language	English