SunStar SPS/E-BH6100 User Manual

17
7) Menu overview
DATAINFO (Menu)
1. Speed
(Set the Speed)
1. Main(Main Speed)
[Scope of parameter values]
1000[rpm]~2200[rpm]
2. Up Bar(Eyelet Speed)
1. Taper
(Taper Pattern)
1. Up Bar (Eyelet
Compensation)
1. Stitch (Stitch No. Setting)
2. Length (Up/Down Knife Space)
3. Slant (Slant Compensation)
1000[rpm]~2200[rpm]
4[stitches]~20[stitches]
-1.0[mm]~1.0[mm]
1~5
0.2[mm]~2.0[mm]
5[mm]~38[mm]
0.3[mm]~2.0[mm]
0.0[mm]~20.0[mm]
2. Zigzag (Straight Line
Compensation)
3. Dn Bar (Taper
Compensation)
1. Pitch (Pitch Setting)
2. Length (Pattern Length Setting)
1. Offset (Taper Start Position)
2. Length (Length Setting)
2. Tack
(Tack Pattern)
1. Up Bar (Eyelet
Compensation)
4. Eyelet (Eyelet
Shape Pattern)
1. InSide (Inside)
2. OutSide (Outside Compensation)
3. Stitch (Stitch No. Setting)
1. Stitch (Stitch No. Setting)
2. Length(Up/Dn knife space)
3. Slant (Slant Compensation)
4[stitches]~20[stitches]
-1.0[mm]~1.0[mm]
1~5
0.2[mm]~2.0[mm]
5[mm]~38[mm]
5[stitches]~18[stitches]
2.0[mm]~6.0[mm]
0.0[mm]~2.0[mm]
2.0[mm]~5.0[mm]
-1.0[mm]~1.0[mm]
16[stitches]~60[stitches]
2. Zigzag (Straight Line
Compensation)
3. Dn Bar (Tack
Compensation)
1. Pitch (Pitch Setting)
2. Length (Pattern Length Setting)
1. Stitch (Stitch No. Compensation)
2. Length (Stitch Length Compensation)
3. Overlap (Overlap Setting)
3. Knife(Knife-Related
Settings)
1. Length(Knife No)
1~6
2. L Space(Left Space)
4. KNF POS(Place Motion Space)
5. CP Type (sewing size setting)
-0.5[mm]~0.5[mm]
5[pulse]~20[pulse]
(
*
)
4. E_Comp.(Compensate
the Up bartack part)
1. Rotate(Eyelet Rotation)
-6~6
2. Radius(Eyelet Radius)
3. X_Comp(X Position Compensation)
-3~5
-6~6
5. C_Comp.(Compensate
the Zigzag part)
1. Rotate(Straight Line Rotation)
-6~6
2. Length(Straight Line Pitch)
3. Width(Straight Line Width)
-1~6
-1.0[mm]~1.0[mm]
6. T_Comp.(Compensate
the Slant)
1. Taper (Taper Pattern Compensation)
-5~5
2. Tack (Tack Pattern Compensation)
-1.0[mm]~1.0[mm]
-1.0[mm]~0.0[mm]
7. Chain(Set the Chain
Sewing)
On / Off
1[unit]~15[unit]
8. BT_STI(Set the
Back-Tack)
0[stitches]~2[stitches]
0[stitches]~2[stitches]
2. Pattern
(Set the Pattern)
3. R Space(Right Space)
-0.5[mm]~0.5[mm]
4. R_Comp(Adjustment of right side slant width)
-1.0[mm]~1.0[mm]
5. L_Comp(Adjustment of left side slant width)
-1.0[mm]~1.0[mm]
3. Radial (Radiation pattern reply correct)
-6~6
3. Radial
(Radiation pattern)
1. Up Bar (Eyelet
Compensation)
1. Stitch (Stitch No. Setting)
2. Length(Up/Dn knife space)
3. Slant (Slant Compensation)
4[stitches]~20[stitches]
-1.0[mm]~1.0[mm]
1~5
0.2[mm]~2.0[mm]
5[mm]~38[mm]
5[stitches]~20[stitches]
0
2. Zigzag (Straight Line
Compensation)
3. Dn Bar (Tack
Compensation)
1. Pitch (Pitch Setting)
2. Length (Pattern Length Setting)
1. Stitch (Stitch No. Compensation)
2. Length ( Radiation pattern long)
1. OnOff(Enable/Disable the Chain Sewing Function)
2. Set_No(Set the Chain Sewing)
1. Start(Set the Number of the Start Back-Tack Stitches)
2. End(Set the Number of the End Back-Tack Stitches)
1. X_Comp (X-direction Compensation)
2. Y_Comp(Y-direction Compensation)
1) The symbol (
*
) is used to determine the clamp type (sewing size) for BH6100-02.
2) There are four clamp type options from A to D.
3) For more information on how to set the clamp type, see “6-4) Knife-related Parameter Setting”.
Caution

SunStar SPS/E-BH6100 Specifications

General

Brand	SunStar
Model	SPS/E-BH6100
Category	Sewing Machine
Language	English