60
6-12) Changing the sewing start position
① Turn the power on while pressing the LEFT key and the clamp
Up/Down key simultaneously. You can see ‘1’ blink on the
screen. Select Group A and press ENTER to change the
sewing start position.
② When a new screen appears, use the DOWN key to select
‘A15:BaseP’ and press ENTER.
③ When a new screen appears, use ◀(+) and ▶(-) to change the
sewing start position.
•Origin Position: The feeding base always returns to the origin
when sewing is completed.
•Sewing Position: The feeding base moves to the sewing start
position when sewing is completed.
④ Press ENTER and you can hear a “beep” sound, which
indicates the completion of the setting. The screen returns to
the Parameter Group A screen.
+
↓
↓
↓
↓
OR
↓
+
“Power On”
To Next Page
Loading...
