SunStar SPS/E-BH6100 - Blade Motion Method Setting

42
◀Note▶ Example of knife space setting
Knife Space
[Same Left, Right Knife Space] [Bigger Right Knife Space] [Bigger Left Knife Space]
3) Blade Motion Method Setting
① Turn on the power while the LEFT( ) key and the PF
Up/Dn( )key are being pressed, and then ‘1’blinks. To
set the blade motion method, select Group A and press
ENTER.
② When the screen changes, press the DOWN( ) key to
select ‘A25 :Kmode’and press ENTER.
③ Use◀(+) and ▶(-)keys to select either ‘Sensor’or‘Timing’
and press ENTER.
④ Pressing ENTER completes the setting with the indication of a
beep sound and the screen reverts to Parameter Group A
screen.
+
+
“Power On”
↓
OR
↓
OR
↓