36
4) Create the pattern data
① Press ENTER and the initial parameter setting screen appears.
② Select [HOME] or [RETURN] by pressing UP or DOWN.
③ When ENTER is pressed, a pattern is created with changed
parameter data.
④ When a pattern creation is complete, the display automatically
returns to the initial screen.
OR
↓
◀Note▶ Shape of pattern with square bartack
•Based on the assumption that the left and right width of square bartack is 2.0[mm]
respectively, the length of square bartack is set at 4.0[mm] as default.
•Based on the assumption that the left and right width of square bartack is 2.0[mm]
respectively, the overlap value is set at 1.0[mm] as default.
Length
Length of
square
pattern
Overlap size
To Next Page
Loading...
