SunStar SPS/E-BH6100 - Zigzag Shape Creation

29
① Select ‘2’ using the UP, DOWN keys and press ENTER.
ex) 2: Zigzag
② Set the values of pitch and length .
ex) Pitch = 0.10
Length = 25.0
③ Use the DOWN key to choose [RETURN] and press ENTER.
④ Then the screen returns to the initial display for creating the up
bartack part, the down bartack part and the zigzag shapes.
2) Create the zigzag shape
OR
↓
OR
↓
↓
↓
↓