28
◀Note▶ Things to consider when setting 「Length」for eyelet
•+ value setting: The Y-direction knife space is moved
upward by the set value.
•- value setting: The Y-direction knife space is moved
downward by the set value.
Y-direction
Knife Space
Compensation
+
-
◀Note▶ Example of eyelet slant compensation
•When the eyelet slant compensation is set at 1, the number
of stitches at the eyelet’s slant increases by 1, while the
number of stitches at the straight line decreases by 1.
Eyelet
Slant
Compensation
To Next Page
Loading...
