34
2) Create the zigzag shape
⑤ Select ‘2’using UP or DOWN and press ENTER.
ex) Select ‘2: Zigzag’
⑥ Set pitch and length.
ex) Pitch = 01.0
Length = 25.0
⑦ In one second, the screen automatically returns to the previous
screen. Select [RETURN] by pressing DOWN and then press
ENTER.
⑧ The screen moves to the screen of creating the up/down bartack
and zigzag shape.
OR
↓
↓
OR
↓
↓
⑫ In one second, the screen automatically moves to the previous
screen. Select [RETURN] by pressing DOWN and then press
ENTER.
◀Note▶
When READY is pressed, the changed parameter values
are saved in the memory, and the initial sewing screen
appears.
⑬ The screen moves to the screen for creating the up, down bartack
and zigzag shape.
To Next Page
Loading...
