SunStar SPS/E-BH6100 - Synchro Test; Hand Switch Input Test

67
① Use the UP or DOWN key and select ‘5’ on the initial test
screen. Press ENTER.
② When the test screen appears, check whether the value is
changing, while spinning the hand pulley by hand. The one
spinning of the hand pulley increase the value by 1.
ex) When the hand pulley is spined once, 0000 becomes →
0001.
③ Press READY( ), and the test end message appears on the
screen. The machine automatically moves back to the original
position and the screen switches back to the initial test screen.
5) Synchro Test
① Use the UP, DOWN keys to select ‘6’ on the initial test screen.
Press ENTER.
② When the test screen appears, the screen message will change
depending on pedal input.
6) Hand switch input test
↓
↓
OR
↓
↓
OR