SunStar SPS/E-BH6100 - Disable the Chain Sewing Function

55
3) Disable the chain sewing function
① To disable the chain sewing function, press the sewing
READY key. When the READY lamp is off, select
[DATAINFO] by using the DOWN key and press ENTER.
② The parameter screen appears and ‘1’ blinks. Use the UP or
DOWN key to select ‘7: Chain’.
③ Press ENTER, and it displays the initial chain sewing setup
screen. Select ‘1:OnOff’ by using the UP or DOWN key and
press ENTER.
④ When a new screen appears, use ◀(+) and ▶(-) to convert the
value from On to Off and press ENTER. Then the O.K.!
message is displayed.
⑤ The screen automatically moves back to the previous screen in
one second. Select [RETURN] by using the DOWN key and
press ENTER. Then the initial chain sewing setup screen
appears.
↓
↓
OR
↓
OR
↓
↓
↓
↓
↓
OR
↓
↓