16-22 FRONT FORK AND STEERING
HANDLEBARS
• Apply adhesive agent to the left handlebar end and inside of
the left grip.
HANDLE GRIP BOND (commercial available)
• Align the “ ” mark on the left grip with the paint mark A on
the left handlebar end.
• Set the “ ” mark B on the handlebar holder forward.
• Align the paint mark C on the handlebars with the matching
surface of the handlebar holder.
• Tighten the handlebar holder bolts to the specified torque.
Handlebar holder bolt: 25 N·m (2.5 kgf-m, 18.0 lb-ft)
NOTE:
When tightening the handlebar holder bolts, first tighten the bolts
1 then bolts 2.
Clearance
FWD
To Next Page
Loading...
