SV 971A User Manual – Appendixes
trigger period given in 0.1 ms. If zero Step is equal to logger time-
step (cf. Tab. B.1.15)
Table B.1.8. Logger trigger parameters
trigger mode:
0 - Off,
4 - measurement on trigger Level+,
5 - measurement on trigger Level–
source of the triggering signal:
0 - Leq(1) the Leq result from the first profile
level of triggering:
24 ÷ 136 dB (*10)
number of the records taken into account before the fulfilment of the
triggering condition (1 10)
number of the records taken into account after the fulfilment of the
triggering condition (1 200)
trigger period given in 0.1 ms. If zero Step is equal to logger time-
step (cf. Tab. B.1.15)
To Next Page
Loading...
