SV 971A User Manual – Appendixes
SV 971A Diffuse Field compensation filter
Note: Using special filters might change the frequency response and measuring ranges of
SV 971A. Please check the below given specification.
Linear operating ranges for LEQ measurements with the Diffuse Field filter
The starting point at which tests of level linearity shall begin is 94.0 dB for the frequencies specifies below. For
the Low measurement range and A weighting linearity test at 31.5 Hz, the starting point is 79 dB.
Table C.1.4. Linear operating ranges for the Normal measurement range for the Diffuse Field filter (for
the sinusoidal signal and microphone sensitivity in the range 32 mV/Pa)
Table C.1.5. Linear operating ranges for the Low measurement range for the Diffuse Field filter (for the
sinusoidal signal and microphone sensitivity in the range 32 mV/Pa)