Svantek SV 971A User Manual

SV 971A User Manual – Appendixes
300
3. Connect the clamp halves (4) to the connector and insert O-ring gasket (3) on the lightning signed
place.
4. Apply the upper, conical part (5) on the preamplifier.
Note: Do not use preamplifier without the dummy microphone. It can cause damage of the O-
ring gasket inside the cone.

Svantek SV 971A Specifications

General

Brand	Svantek
Model	SV 971A
Category	Measuring Instruments
Language	English