SYSMEX CyFlow Cube 8 - Page 148

12 Software description
148 CyFlow
®
Cube 8 | Operating Manual | May 2018 | Revision 032
The columns are width adjustable. To adjust the width, drag the column
divider to the right of the column. If you double-click a column divider, the
column will resize to display its contents optimally.
The Worklist contains the following columns and associated context menus:
 Active: A green arrow displayed in this column indicates the currently
active Worklist item.
 Acquired: A check mark displayed in this column indicates that the
Worklist item has been acquired and has associated listmode data. No
more data can be acquired on this Worklist item.
 Index: This column displays the sequential number representing the
Worklist order. The column is automatically filled and cannot be changed.
 Run Number: The run number is an updating incremental cycle count
per system. The column is automatically filled when acquisition begins.
When acquisition is aborted by the user and a new acquisition has been
started for that Worklist item, the run number is incremented.
 Location: This column specifies the location of a sample within the
source type (plate or tube rack) if an autoloader is used. In manual mode,
the column is blank.
 Panel: To combine several Worklist items, they can be organised in a
panel. This is typically used for series of measurements of the same
sample with different settings.
The column displays the panel name for defined Worklist items. When a
Workspace is defined within the Worklist, a panel name is created. The
default names will ascend numerically ("Panel 1", "Panel 2", etc.) and are
unique to the Worklist.
In the context menu of the "Panel" column, options are provided to save
the panel, to insert or replace a panel, to add an item to the panel and to
clear the panel, i.e. to delete all Worklist items associated with this panel.
 Workspace: The column displays the name of the Workspace file
associated with the Worklist item.
When a Workspace is defined within the Worklist, a Workspace name is
created. The default names will ascend numerically ("Workspace 1",
"Workspace 2", etc.) and are unique to the Worklist.
If a Workspace has been modified since its last save, an asterisk is
displayed in front of the Workspace name indicating that the
corresponding file contains unsaved changes.
In the context menu of the "Workspace" column, options are provided to
open a new Workspace file, to save the Workspace file, to replace the
Workspace file or to apply the Workspace file to a panel or to the
complete Worklist.
 Lab #: This column is provided for entering the laboratory barcode
number or blood tube identification number. When data acquisition is
finished, the column is disabled.