Using Address Book on the Web
October 21, 2003 T-Mobile Sidekick Owner’s Manual 212
4 When finished adding labels, click Save. The page refreshes, and your new labels are included in the list in
alphabetical order. A new blank box is added at the bottom in case you want to add another label.
5 After saving, you will be able to assign contact information to this new label, as well as view it on the Browse
Contacts page describing the contact information displayed.
To edit an existing label:
1 In the Address Book sidebar, click Settings; then click the Labels tab at the top of the page to open the
Labels page.
2 Edit the label as you wish, then click Save.
To discard a label:
1 In the Address Book sidebar, click Settings; then click the Labels tab at the top of the page to open the
Labels page.
2 Click Discard Label to the right of the label you want to delete. The label’s text box is cleared.
3 Click Save.
Manage Contacts
If you want to clear your Address Book of all contacts in one action, do the following:
1 In the Address Book sidebar, click Settings; then click the Categories tab at the top of the page.
2 This page tells you how many contacts you’ve stored. To discard them all, click Empty My Address Book. To
empty the contacts in a particular category, click Empty Contents in the category row.
3 You will be asked to confirm your discard and warned that proceeding will permanently discard all contacts
from your Address Book; they will not be moved to Trash. To continue, click Discard. If you change your
mind, click Cancel.
If you want to move all the contacts in one category into another, do the following:
1 In the Address Book sidebar, click Settings; then click the Categories tab at the top of the page.
2 Select the check box next to the category of contacts you want to move.
3 From the Move checked to drop-down list, select the category to which you want to move the contacts,
then click Go.
4 Click Save.
Add a Contact
You can add a contact to your Address Book by starting from scratch, or by duplicating an existing contact’s
information, then editing it. Both methods are described below.