Making Phone Calls
October 21, 2003 T-Mobile Sidekick Owner’s Manual 66
Removing an Existing Speed Dial Number
To remove an existing speed dial number, do the following while in the Phone application:
1 From the main Phone screen, press Menu then select Settings > Speed Dial. The Set Up Speed Dial
screen appears.
2 Scroll to highlight the entry you want to remove.
3 Press the DEL key .
4 You’ll receive a confirmation dialog box; select Discard. The speed dial entry is removed.
Headset or Handset?
When making a phone call, you can use the device as a handset or use the headset.
• Handset - Make sure the display lid is in the closed position. Hold the phone as a receiver, speaking into
the microphone located between the Menu and Jump buttons.
Tip! The listening sound is best when you hold the phone tight against your ear and the “mouthpiece”
slightly away from your face, as shown in the illustration above. The microphone is sensitive enough to
pick up your voice even if you hold it at this angle (about 20-30 degrees relative to your face).
• Headset - Plug your headset lead into your device headset/camera jack as shown above.
Adjusting Volume
While you’re on an active call, you can adjust the speaker volume:
1 Scroll to highlight the speaker volume button , then press the wheel. The Volume control
opens:
2 Rotate the wheel to adjust the volume up or down: rotating up (away from you) increases volume; rotating
down (toward you) decreases volume.
To Next Page
Loading...
Need help?
General
