Technogym SYNCHRO Excite + - DEFAULT DISTANCE; ENABLE TGS; ENABLE KEYBOARD

SYNCHRO Excite +: Service & maintenance manual - rev. 7.1
Page 9.5
9.1.10. DEFAULT DISTANCE
It is possible to set the default distance for an exercise session, with values ranging from 1 to 999.
To change the setting, when the display shows the current value:
DEFAULT DISTANCE KM xxx
Press the ENTER key to modify the value: The current parameter value starts to blink on the
display; use the
↑
and
↓
keys to increase or decrease the value, or use the +/- GOAL keys to scroll
through and modify the individual digits.
The default value of this parameter is 10.
9.1.11. ENABLE TGS
It is possible to enable or disable the use of the TGS reader. To change the selection, when the
display shows the current setting:
TGS : xxx
Press the +/- GOAL keys to select the desired option out of those listed in the table below:
TGS
ENABLED <default>
DISABLED
9.1.12. ENABLE KEYBOARD
It is possible to disable the keyboard so that the machine can only be used with the TGS. To change
the selection, when the display shows the current setting:
KEYS : xxx
Press the +/- GOAL keys to select the desired option out of those listed in the table below:
KEYS
ENABLED <default>
DISABLED