Technogym SYNCHRO Excite + - Low Kit fault code; HIGH KIT VERSION; BOOT VERSION; KEY READER VERSION

SYNCHRO Excite +: Service & maintenance manual - rev. 7.1
Page 9.22
9.3.7.2. Low Kit fault code
This function displays the error code that is blocking the low kit. To access this menu, when the
display shows:
LOW KIT FAULT CODE
Press ENTER, the following message appears:
FAULT=XX
In case of FAULT=00, the board is not in an error condition.
9.3.8. HIGH KIT VERSION
This function displays the SW version of the display. To do this, when the display shows:
HIGH KIT VERSION
Press ENTER, the message that identifies the SW version, will appear.
9.3.9. BOOT VERSION
This function displays the BOOT version. To do this, when the display shows:
BOOT VERSION
Press ENTER to display the message which identifies the BOOT version.
The Boot Version parameter displays the boot SW version of display HW. The boot is
the part of the SW, which allows uploading on the display the TG program. This
parameter is just a visualization of the SW version and it can not be modified or
updated.
9.3.10. KEY READER VERSION
This function displays the KEY READER VERSION. To do this, when the display shows:
KEY READER VERSION
Press ENTER to display the message which identifies the KEY READER version.