Technogym SYNCHRO Excite + - STANDARD SETTINGS; LOW KIT MENU; Low kit version

SYNCHRO Excite +: Service & maintenance manual - rev. 7.1
Page 9.21
9.3.6. STANDARD SETTINGS
This function clears the operating data of the machine and simultaneously resets the brake board
parameters to their default values. To access this menu, when the display shows:
STANDARD SETTINGS ?
Press ENTER, the following message appears:
CONFIRM ?
Press ENTER again to reset all parameters to their default values, or return to the upper menu level
by pressing CLEAR for a few seconds.
This function does not alter the language and the TV standard setting.
9.3.7. LOW KIT MENU
This function directly accesses the firmware of the brake board. To access this menu, when the
display shows:
LOW KIT MENU
Press ENTER. This function is structured as follows:
LOW KIT MENU
Low Kit Version
Low Kit fault code
9.3.7.1. Low kit version
This function displays the brake board firmware version. To access this menu, when the display
shows:
LOW KIT VERSION
Press ENTER, the following message appears:
X.Y.Z
Where:
• X = KERNEL
• Y = Brake Board
• Z = Brake Table
Which identifies the firmware version.