Technogym SYNCHRO Excite + - REAR GUARD

SYNCHRO Excite +: Service & maintenance manual - rev. 7.1
Page 7.30
7.7.2. BRAKE BOX COVER GUARD
Figure 7.7-6
1. Back off the 3 screws (a)
, on both sides of
the machine, using a medium Phillips
screwdriver.
2. L
ift up the top cover along the display
column and secure it with a strap.
Figure 7.7-7
3. Back off the 4 screws (b)
with a 4mm
hexagonal wrench.
4. Back off the 2 screws (c)
with a medium
Phillips screwdriver.
5. Remove the front casing (d).
Figure 7.7-8
6. Back off the 2 screw (i)
, with 4mm
hexagonal wrench.
7. Remove the casing.