Technogym SYNCHRO Excite + - Write to low kit; Machine usage data

SYNCHRO Excite +: Service & maintenance manual - rev. 7.1
Page 9.18
9.3.4.2. Write to low kit
To write the values of the currently displayed parameters to the low kit, scroll using the +/- keys
until the display shows:
WRITE TO LOW KIT ?
Press ENTER to write the new data to the low kit, and return to the upper menu level by pressing
CLEAR for a few seconds.
9.3.4.3. Machine usage data
The machine usage data on the display is updated every 10 minutes. This means that, whenever the
machine is switched off, any data modified after the last memory update will be lost.
Message on Display
Description
Life Brake:
Minutes x 10 of operation of the Brake
(Detected by the Low Kit)
Life Kit High:
Minutes x 10 of operation of the High Kit
(Detected by the High Kit)
Life Kit Low:
Minutes x 10 of operation of the Low Kit
(Detected by the Low Kit)
KJ:
Total KJ
(For all the exercises performed)
(Detected by the High Kit)
Tot Km:
Total km travelled
(For all the exercises performed)
(Detected by the Low Kit)
By selecting one of the items in the above table it is possible to modify its content, but only after
having cleared its value. When the ENTER key is pressed the message "Reset life..." appears,
followed by the name of the selected item; pressing ENTER again resets the value of the selected
item, while pressing CLEAR reverts to the preceding value.