7-44
Cn051 Low voltage protection level
【
5-6-9
】
Initial Value Unit Setting Range Effective Cn029 Reset
200V: 190
400V: 380
Volt
200V: 170 ~ 190
400V: 340 ~ 380
-- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0036H 2033H 2033H O O O O O
Setting Description: When the Driver input power supply voltage is less than Cn051, after delaying the Cn052 setting
time, trigger the Low Voltage Protection Alarm. But if the voltage is under 170V, the system will run
low voltage protection directly, regardless of Cn052 setting time.
Cn052 Low voltage protection alarm delay time
【
5-6-9
】
Initial Value Unit Setting Range Effective Cn029 Reset
4 250ms 0 ~ 100 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0037H 2034H 2034H O O O O O
Setting Description: When the Driver input power supply voltage is less than Cn051, after delaying the Cn052 setting
time, trigger the Low Voltage Protection Alarm. But if the voltage is under 170V, the system will run
low voltage protection directly, regardless of Cn052 setting time.
Cn053.0 Current offset automatic correction (only usable under Servo Off)
Initial Value Unit Setting Range Effective Cn029 Reset
0 -- 0 ~ 1 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0038H 2035H 2035H O O O O O
Setting Description: The Driver executes the Current Offset Correction after setting to 1, and clear the setting to 0
automatically after the completed correction.
Setting Description
0 Does not execute Current Offset Correction
1 Execute Current Offset Correction
To Next Page
Loading...
