7-49
Cn070 Notch filter quality factor (third set)
【
6-4
】
Initial Value Unit Setting Range Effective Cn029 Reset
7 -- 1 ~ 100 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0049H 2046H 2046H O O O O -
Setting Description: Used to adjust the frequency range to be suppressed, the smaller the Cn070 value is, the wider the
frequency range of suppression, and the User can adjust according to the actual conditions.
Cn071 Notch filter depth (third set)
【
6-4
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 -- 1 ~ 1000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
004AH 2047H 2047H O O O O -
Setting Description: Used to adjust the frequency depth to be suppressed, the smaller the Cn071 value is, the deeper the
frequency depth to be suppressed, and the User can adjust according to the actual conditions.
Cn072 Notch filter frequency (fourth set)
【
6-4
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 Hz 0 ~ 2000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
004BH 2048H 2048H O O O O -
Setting Description: When to eliminate the vibration or noise caused by resonance, etc., please input the frequency when
vibration occurs in Cn072.
Cn073 Notch filter quality factor (fourth set)
【
6-4
】
Initial Value Unit Setting Range Effective Cn029 Reset
7 --- 1 ~ 100 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
004CH 2049H 2049H O O O O -
Setting Description: Used to adjust the frequency range to be suppressed, the smaller the Cn073 value is, the wider the
frequency range of suppression, and the User can adjust according to actual conditions.
To Next Page
Loading...
