7-50
Cn074 Notch filter quality depth (fourth set)
【
6-4
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 --- 0 ~ 1000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
004DH 204AH 204AH O O O O -
Setting Description: Used to adjust the frequency depth to be suppressed, the smaller the Cn074 value is, the deeper the
frequency depth to be suppressed, and the User can adjust according to actual conditions.
Cn075 Notch filter quality frequency (fifth set)
【
6-4
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 Hz 0 ~ 2000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
004EH 204BH 204BH O O O O -
Setting Description: When to eliminate the vibration or noise caused by resonance, etc., please input the frequency when
vibration occurs in Cn075.
Cn076 Notch filter quality factor (fifth set)
【
6-4
】
Initial Value Unit Setting Range Effective Cn029 Reset
7 -- 1 ~ 100 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
004FH 204CH 204CH O O O O -
Setting Description: Used to adjust the frequency range to be suppressed, the smaller the Cn076 value is, the wider the
frequency range of suppression, and the User can adjust according to the actual conditions.
Cn077 Notch filter quality depth (fifth set)
【
6-4
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 -- 0 ~ 1000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0050H 204DH 204DH O O O O -
Setting Description: Used to adjust the frequency depth to be suppressed, the smaller the Cn074 value is, the deeper the
frequency depth to be suppressed, and the User can adjust according to actual conditions.
To Next Page
Loading...
