7-53
Setting Description:
Cn097.2 Pulse encoder signal input phase sequence
【
5-6-17
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 -- 0 ~ 1
★
--
RS-485 CANopen EtherCAT Pi Pe Pt S T
0064H 2061H 2061H O O O O O
Setting Description:
Cn097.3 Linear motor pitch detection
【
5-6-17
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 -- 0 ~ 1
★
--
RS-485 CANopen EtherCAT Pi Pe Pt S T
0064H 2061H 2061H O O O O O
Setting Description:
Cn098 Motor cable disconnection detection time
Initial Value Unit Setting Range Effective Cn029 Reset
3000 ms 1000 ~ 10000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0065H 2061H 2061H O O O O O
Setting Description: Motor cable disconnection detection time; continuous detection and AL.020 will occur when time is
up.
Setting Description
0
AL.009 will be generated immediately when the EMC
function is received.
1
After the EMC function is received, it will decelerate to zero
speed according to the Cn087 setting and generate AL.009.
Note) If mechanical brake sequence is used, AL.009 will
only be generated after the sequence is satisfied
Setting Description
0 Pulse input A phase is ahead of B phase
1 Pulse input A phase is behind B phase
Setting Description
0 Execute linear motor pitch detection function
1 Do not execute linear motor pitch detection function
To Next Page
Loading...
