G10 Installation Guide 7.13.2 71
4
Power On G10 and Configure Network Connectivity
Rev. 005-140228
8. Click the Submit button. A Confirm Configuration Settings page displays
(Figure 4.14). Review your settings. Click Apply Conf
ig to apply the current
settings, or click Edit
Config to return to previous page to make corrections.
Figure 4.14 - Probe Installation GUI - Confirmation
9. When you apply the configuration, the following Web page appears
(Figure 4.15). It will take approximately 10 minutes for the G10 to
complete
setup.
Figure 4.15 - Probe Installation GUI - Configuring Probe
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited
To Next Page
Loading...