Interface to all major testers and rack and stack test equipment for a true and accurate tester interface.
Operate at the touch screen or via remote interface
(IEEE-488, RS232, ST/ET/SFF, Ethernet).
Easily access input ports and drivers for
keyboard, mouse, printer and monitor from the front panel.
Patented DUT Thermal Precision
Full ATE Compatibility Plus
Proper Coupling Assures Precise Temperature Control
+
/
-
0.1ºC precision
is provided by Temptronic patented
3
DUT Dual Loop
Control™ which performs direct temperature control at the device case.
Flexibility to choose from four DUT sensors: new Internal
Diode Sensor, Type T or Type K Thermocouple, or 100 ohm RTD.
Temperature Sensors at the DUT (Device Under Test) assure optimum thermal
accuracy
4
(to within 1.0ºC) and efficiency.
Temperature is sensed at the device once every 250 milliseconds, to bring the
DUT as close as possible to the required temperature.
“At Temperature” Windows enable the operator to specify a required
temperature range at which testing may be performed, for maximum test
efficiency.
3
U.S. Patent No. 4,734,872
4
Temperature accuracy is calibrated to an NIST–traceable standard.
Pneumatic control for raising and lowering the thermal head assists in its
proper positioning over the DUT for highly repeatable accuracy. The arm may
be manually rotated, moved in/out, up/down and locked in place for the
optimum alignment and stability at the test site.
The
thermal cap’s double-layer glass or metal surrounds the DUT, creating a
frost-free thermal test environment. All thermal caps may be removed or
replaced without tools.
The
Thermal Interface Kit is used to ensure maximum heat transfer to the
DUT while protecting the tester from temperature extremes. Comprised of five
non-conductive shrouds plus sheets of non-conductive foam, the kit facilitates
proper coupling to the test site. Additional conductive or non-conductive
interface kits, consisting of shrouds of various sizes, are also available.
The TPO4300A provides ionically balanced air (free of static charge). When
coupled with a standard metal thermal cap and the optional conductive shroud
kit for interfacing to the tester socket, an
ESD protected environment is
assured.
The tester socket and test fixture are maintained at temperature close to
ambient while testing at high or low temperatures by the
Purge Air feature,
which prevents moisture, frost and overheating of tester electronics.
To Next Page
Loading...