98
—End
10.5.4 Example
Application Scenario
Michael bought an AC5 for network.He finds unknown devices in module Attached Devices of the router. But
he hopes to allow only devices owned by family members to access the internet through the router.
Solution
The Filter MAC Address function of the router can address this requirement. Assume that the clients owned by
his family members have following MAC addresses:
4C:CC:6A:AD:14:53
14:5F:94:BC:FC:81
1C:5C:F2:B4:40:01
Procedures:
1. To access the configuration page, click Advanced Settings > Filter MAC Address.
2. MAC Address Filter Mode: Select Whitelist.
3. Whitelisted Device: Enter the name of the phone that is allowed to connect the router, which is
Phone-1 in this example.
4. MAC Address: Enter MAC address of client you allow to connect the router, which is 14:5F:94:BC:FC:81
in this example.
5. Click +New.
6. Refer to step 3-5 for adding MAC address 4C:CC:6A:AD:14:53.
7. Click Save.
To Next Page
Loading...
