Tenda AC5 - Rear Panel

8
LED Indicator
LED Indicator
Name
Status
Description
improperly.
T
Reserved
1.3.2 Rear Panel
Port/Button
Description
Power
Used to power on/off the router using the power adapter included with the
package.
WPS/Reset
Used to start the WPS negotiation process of the router, or to restore the router to
the factory settings.
 WPS: Press the button of the router. Then enable the WPS function of
another device within 2 minutes to establish a WPS connection.
 Reset: Hold the button down for 8 seconds, and wait until all LED indicators
blink once to restore the factory settings of the router.
WiFi on/off
You can enable/disable WiFi of the router by clicking this button.
WAN
Used to connect this router to the internet.
3
By default, it functions as a LAN port. But after the IPTV function of the router is
enabled, it functions only as an IPTV port used to connect to a set-top box.
2/1
Used to connect to devices such as computers and switches.