49
6.3 Wireless Repeating
6.3.1 Overview
The Wireless Repeating function enables the router to function as a wireless repeater which extends WiFi
coverage by connecting to network of an upstream router. You can use this router to extend wireless network
coverage in the WISP or Client+AP mode.
If you want to repeat the WiFi hotspot provided by your ISP, the WISP mode is recommended; otherwise,
select WISP or Client+AP mode.
To access the configuration page, click WiFi Settings > Wireless Repeating. By default, the function is disabled.
Enable the function by switching the Wireless Repeating button to . The configuration page is
shown as follows.
If the Wireless Repeating function is enabled, the Sleeping Mode, IPTV, Guest Network, WPS, and WiFi
Schedule functions become unavailable. For details, refer to messages on the web UI of the router.
To Next Page
Loading...
