Tenda AC5 - System Status; Information

136
11.10 System Status
This module enables you to view the basic information of the router, including the Information, WAN Status,
LAN Status, and WiFi Status sections.
To access the configuration page, choose System Settings > System Status.
11.10.1 Information
This module enables you to view system time, uptime, firmware version, and hardware version. See the
following figure:
Parameters descriptions
Parameter
Description
System Time
It specifies the current system time of the router. Ensure that the router is connected
to the internet properly.
Uptime
It specifies the time that has elapsed since the router was previously started.
Firmware
Version
It specifies the current firmware version of the router. You can check whether the
firmware upgrade configured in Firmware Upgrade succeeded here.
Hardware
Version
It specifies the current hardware version of the router.