70
Guest Network
7
7.1 Overview
This module makes you enable/disable the Guest Network function and change Guest Network’s WiFi name
and password.
Devices connected to the guest network can access to the internet and communicate with each other, but
cannot access the router’s web UI or the master network. This function enables guests to access the internet and
ensures security of the master network.
To access configuration page, click Guest Network. The Guest Network function is disabled by default.
Parameter descriptions
It specifies whether to enable the Guest Network function.
It specifies the 2.4 GHz/5 GHz WiFi name of the guest network. By default, Tenda_VIP
is for 2.4 GHz network and Tenda_VIP_5G for 5 GHz network. You can change WiFi
names if required. To distinguish guest network from non-guest network, you are
recommended not to set the same names for these two networks.
It specifies the passwords for the router’s two guest networks. Please set according
to your requirements.
It specifies the validity of guest network. It represents the Guest Network function
will be disabled automatically in specified time so wireless devices will not search it.
To Next Page
Loading...
