Tenda AC5 - PPTP;L2 TP Client; Overview

85
Parameter
Description
Uptime
It specifies the time that has elapsed since the PPTP device previously dialed in the
server successfully.
9.3 PPTP/L2TP Client
9.3.1 Overview
You are allowed to set router as a PPTP/L2TP client on the PPTP/L2TP Client page.
The router can connect to the PPTP/L2TP server after the PPTP/L2TP Client function is enabled. Example: If
users subscribe to the VPN service provided by their ISP when having broadband, they can dial in their ISP’s VPN
network through the PPTP/L2TP Client function of the router. To access the configuration page, click VPN >
PPTP/L2TP Client.
Enable PPTP/L2TP Client. See the following figure.