Tenda AC5 - Adding a DDNS Rule

108
Parameter descriptions
Parameter
Description
DDNS
It specifies whether to enable the DDNS function. By default, the DDNS function is
disabled.
Service
Provider
It specifies a DDNS service provider. The supported service providers include
no-ip.com, 3322.org, dyndns.org, 88ip.cn, and oray.com.
User name
It specifies the user name registered on a DDNS service provider's website for logging
into the DDNS service.
Password
It specifies the password registered on a DDNS service provider's website for logging
into the DDNS service.
Domain Name
It specifies the DDNS domain name registered on a DDNS service provider's website.
If this item does not appear after you select service provider, you do not need to
enter domain name.
Connection
Status
It specifies whether the DDNS service is configured successfully.
10.9.2 Adding a DDNS Rule
1. To access the configuration page, click Advanced Settings > DDNS.
2. DDNS: Switch the button to .
3. Service Provider: Choose your DDNS service provider.