Tenda AC5 - Example

67
6.7.3 Example
Application Scenario
Michael could access the internet through his optical modem using Ethernet cable. But now he wants to access
the internet by WiFi.
Solution
AC5 in the AP mode enabled could address this requirement. After configuration, wireless devices such as
smart phones can access the internet through the WiFi of AC5.
The following figure shows the application scenario.
Connect the optical modem to any port of the router using an Ethernet cable. Connect smart phones to the
router’s WiFi and the computer to the router using Ethernet cable.
Procedures:
1. To access the configuration page, click WiFi Settings > AP Mode.
2. Switch the AP mode button to .
3. Click Save.