26
2.2.2 Example: Computer
Step 1 Connect devices.
(1) Power on the original router and AC5.
(2) Connect the WAN port of the original router to a LAN port (1/2/3) of AC5 using an Ethernet cable.
When the LAN and WAN indicators of the new router are solid on for 3 seconds after fast blinking,
the ISP user name and password of the original router are migrated to the new router
successfully.
(3) Remove the original router.
(4) After successful migration, plug the Ethernet cable that has connected to the internet into the
WAN port of AC5.
(5) Connect your computer to a LAN port (1/2/3) of the router using an Ethernet cable.
If a desktop is used to connect to the router’s WiFi network, you need to install a wireless adapter on it
first.
To Next Page
Loading...
