Tenda AC5 - Page 82

78
Enable PPIP Server. The figure below shows the dialog box that appears after the function is enabled.
Parameter descriptions
Parameter
Description
PPTP Server
It specifies whether to enable the PPTP server function. If the function is enabled,
the router functions as a PPTP server.
IP Address
Pool
It specifies the range of IP addresses that PPTP server can assign to devices.
MPPE
Encryption
It specifies whether to enable MPPE encryption function.
User Name
Set user name and password that is allowed to dial in PPTP server. This name and
password is used when device is connected to PPTP server.
Password
Connection
Status
It specifies the status of a VPN connection.
Operation
The following operations can be performed on the rules:
 : It is used to add PPTP users.
 : It is used to disable PPTP users.
 : It is used to enable PPTP users.
 : It is used to delete PPTP users.