Toro GrandStand 74534 - Page 124

ENGINE
5-1336” & 40” Toro GrandStand Service Manual
5
13. Remove the rope from the engine cylinder and
replace the spark plug (Fig. 387).
15. Secure the engine to the engine base using the four
sets of bolts and Belleville washers. Torque the bolts
to 30 - 35 ft-lbs. (41 - 47 Nm) (Fig. 389).
Fig. 387 IMG-9634a
14. Using a hoist, position the engine onto the engine
base (Fig. 388).
Fig. 388 DSCN-2587a
Fig. 389 DSCN-2581a