Toro GrandStand 74534 - Page 125

ENGINE
5-14 36” & 40” Toro GrandStand Service Manual
5
16. Secure the PTO stop bracket to the engine base
using a bolt and nut (Fig. 390).
17. Feed the clutch wire harness up through the engine
base (Fig. 392).
Fig. 390 DSCN-2642a
Note: Ensure the PTO stop bracket is nested in the
slot on the clutch plate (Fig. 391).
Fig. 391 DSCN-2645a
Fig. 392 DSCN-2647a
18. Install the rubber grommet into the engine base (Fig.
393).
Fig. 393 DSCN-2649a