Toro GrandStand 74534 - Page 127

ENGINE
5-16 36” & 40” Toro GrandStand Service Manual
5
23. 36” Deck: Install the extension spring to the idler
bracket and spring anchor (Fig. 398).
25. 40” Deck: Install the extension spring to the LH
idler bracket and spring anchor (Fig. 400).
Fig. 398 DSCN-2666a
24. 40” Deck: Route the deck belts around the deck
spindle pulleys. Refer to decal 119-0187 (Fig. 399).
Fig. 399 decal 119-0187
Fig. 400 DSCN-2670a
26. 40” Deck: Install the extension spring to the RH
idler bracket and spring anchor (Fig. 401).
Fig. 401 DSCN-2667a