Toro GrandStand 74534 - Page 147

HYDRAULIC DRIVE SYSTEM
6-14 36” & 40” Toro GrandStand Service Manual
6
11. Install the second high pressure hose to the pump
(Fig. 470).
13. Install the hose to the wheel motor (Fig. 472).
Fig. 470 DSCN-3059a
12. Loop the hose around the control cables and
opposite side pump hoses (Fig. 471).
Fig. 471 DSCN-3061a
Fig. 472 DSCN-3063a
14. Secure the control cable to the pump control arm
(Fig. 473).
Fig. 473 DSCN-2978a